If your plastic solar lights have seen better days and are in need of a good cleaning, don’t despair. With a little elbow grease and the right cleaners, you can get them looking like new again.

  • Unscrew the solar light from the ground stake
  • Remove the batteries from the solar light
  • Use a Phillips head screwdriver to unscrew the screws holding the light cover in place
  • Take off the light cover and discard any bugs or debris that may be inside
  • Wipe down the inside of the light cover with a damp cloth to remove any dirt or dust buildup
  • Reassemble the solar light, being sure to screw on the light cover tightly so that it is weatherproofed
  • Replace the batteries in the solar light and screw it back into its ground stake

How to Clean Yellowed Plastic Solar Lights

If your plastic solar lights have started to turn yellow, don’t worry – it’s an easy problem to fix! There are a few different methods you can use to clean yellowed plastic and get your lights looking like new again. One simple way to clean yellowed plastic is to use a mixture of vinegar and water.

Simply mix equal parts vinegar and water in a bowl, then dip a cloth into the mixture and use it to wipe down the affected areas. If your lights are really dirty, you may need to let the mixture sit on the surface for a few minutes before wiping it away. Another method you can try is using bleach.

Be sure to dilute the bleach with water before applying it to the plastic, as undiluted bleach can damage the material. Once again, wipe down the affected areas with a cloth soaked in the bleach solution, then rinse well with plain water.

If neither of these methods seems to be doing the trick, you can always try sanding down the yellowed areas with fine-grit sandpaper.

This will remove any build-up that may be causing the discoloration. Just be sure not to sand too hard or too much – you don’t want to damage the plastic beneath!

How Do You Clean Plastic Outdoor Solar Lights?

If your outdoor solar lights are made of plastic, you can clean them with a mild soap and water solution. Simply mix together a small amount of soap and water, and use a soft cloth to wipe down the light. Be sure to rinse the light well afterwards to remove any soap residue.

How Do You Clean Haze off Solar Lights?

If you notice that your solar lights are starting to produce a hazy light, it’s important to clean them as soon as possible. Haze can be caused by a build-up of dirt, dust and grime on the surface of the lights, and if left unchecked, it can eventually lead to permanent damage. The good news is that cleaning haze off solar lights is relatively easy and only requires a few simple household items.

Here’s what you’ll need: – A soft cloth or brush – Water

– Vinegar (optional) – A ladder (if necessary) Here’s how to clean your solar lights:

1. Begin by using your soft cloth or brush to gently remove any loose dirt, dust or grime from the surface of the light. If there are any stubborn areas, you can use a little water to help loosen things up.

2. Once you’ve removed all the visible debris, it’s time to give your lights a thorough cleaning with water.

You can do this either by hand or with a garden hose. If using a hose, make sure the water pressure isn’t too high, as this could damage the surface of the light. 3. If your solar lights are still looking hazy after being cleaned with water, you can try wiping them down with vinegar.

This will help remove any residual dirt and grime that may be stuck on the surface. 4. Once you’re finished cleaning, simply allow your solar lights to air dry before putting them back in place.

How Do You Make Plastic Solar Lights Clear Again?

If your plastic solar lights have become cloudy, you can clean them with a few simple household items. First, fill a bucket with warm water and add a drop or two of dish soap. Submerge the light in the soapy water and use your hands to rub away any dirt or grime.

Rinse the light off with clean water and dry it with a soft cloth. If the cloudiness persists, you can try scrubbing the light with white vinegar. Soak a rag in vinegar and rub it over the surface of the light until it becomes clear.

Rinse the light off with clean water and dry it thoroughly before putting it back in place.

What is the Best Way to Clean Solar Light Panels?

It is important to keep solar light panels clean so that they can continue to absorb sunlight and generate electricity efficiently. There are a few different ways to clean solar light panels, but the best way depends on the type of panel and the level of dirt or grime that has built up on it.

For lightly dirty panels, a simple rinse with water from a garden hose should be enough to remove any debris or dirt.

If the panels are very dirty, however, you may need to use a mild soap and soft brush to scrub them clean. Be sure to rinse the soap off completely afterwards so that it doesn’t leave any residue that could attract more dirt. If your solar light panels have been damaged by hail or other severe weather, you’ll need to have them repaired or replaced by a professional.

In most cases, simply cleaning the panels won’t be enough to get them working properly again.

Quick & Easy Way to Clean, Renew & Restore Solar Pathway Lights! Wow!! Looks Brand New!!!


Assuming you would like a summary of the blog post titled “How to Clean Plastic Solar Lights”: Most solar lights are made out of plastic, which can get dirty over time. To clean your solar lights, start by taking them down and removing the batteries.

Next, use a soft cloth to wipe down the outside of each light. If there are any stubborn dirt or grime spots, you can try using a toothbrush dipped in soapy water. Once you’ve cleaned the outside of the lights, put the batteries back in and rehang them up.

Leave a Reply

Your email address will not be published. Required fields are marked *